Linear Door/Window Home Security External Contact and Glass Break Sensor DXT-31
(DXT-31)
The Model DXT-31 Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear's DX Format receivers. This
transmitter can be used in a limitless number of wireless remote control applications. Triggering the transmitter with its built-in magnetic
switch, an external switch or an external glass break detector sends a digitally coded wireless signal to its companion receiver. Pressing
the transmitter's case sends a test transmission.
The digital DX code format features over a million possible codes. The DX
transmitters are precoded at the factory to unique codes, so no field coding is required. The DXT-31 can send three different codes: alarm,
restore and low battery.
In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the
frame. When the magnet moves more than 1/2" away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a
restore signal is sent. Alarms and restores can also be sent from external contacts wired to the terminal block. Pressing the case sends a
test transmission that indicates the current state of the contacts.
The transmitter is powered from two 3-Volt #2032 lithium batteries
with an expected battery life of up to 3 years. The red test/operate indicator lights during operation and test. It will blink during
operation and test when the batteries are low.
A three-position terminal block is for connection to normally closed external contacts
or a normally open Window Bug type glass break sensor. An internal jumper selects which input to use. Selections are: internal switch only,
external switch only, both external and internal switch, and glass break sensor.
A snap-on transmitter mounting plate is provided for
easy installation. The magnet has four height positions. An additional snap-on magnet spacer is provided for a total of eight magnet
positions.
- Alarm, alarm restore, and low battery
transmissions
- Includes magnet for internal contact
- Includes mounting shoe
- External Contact Terminals
- DX
format
- N/O or N/C input loop circuit
- Powered by 2032 two lithium batteries (included)
- RF frequency: 315 MHz
- 1.6" W x 3.4" H x 1.2" D
Specifications
- Dimensions: 1.6 in W x 3.4 in H x 1.2 in D (41 x 86 x 30 mm)
- Power: Two 3V DL-2032 Lithium batteries (supplied)
- Current Consumption: 8 mA average while transmitting 1 µA standby
- Battery Life: Three years (typical)
- Measured Range: 700 feet in open air, one quadrant
500 feet minimum in open air (four quadrant test) - Code Outputs: Alarm, restore, low battery
- External Input Terminals
Terminals 1, 2 accept N/C contact devices
Terminals 2, 3 accept N/O glass break sensors - Jumper Pin Mode Selection
Pins 1, 2 Glass break operation only
Pins 2, 3 For external contact and glass break operation
Pins 3, 4 For internal reed switch and glass break operation
Jumper removed: Internal, external, and glass break operation
- Operating Frequency: 315 MHz
Compatible Receivers
- Linear Supervised 4-Channel Solid State Relay Receiver DXSR-1504
- Linear Supervised 8-Channel Solid State Relay Receiver DXSR-1508
- Linear 1-Channel Digital Isolated Relay Output Receiver DXR-701
- Linear 2-Channel Digital Isolated Relay Output Reciver DXR-702
Related Products :
Garage Door > Linear Security Systems > Detectors & Accessories
|
|
 Email a Friend
Product Inquiry
|
